Grizzly C1189 3/4"r Roundover Bit, 1/2" Shank

Grizzly C1189 3/4"r Roundover Bit, 1/2" Shank Review

Grizzly C1189 3/4"r Roundover Bit, 1/2" Shank Feature

• Cutter Dia.: 2"
• Cutting Length: 1"
• Overall Length: 2-7/8"
• Radius: 3/4"

Roundover Bits are used to make quarter rounds of various radii. Also used to soften edges, especially if making anything a child would use. Everyone needs a drawer full of these. So many uses we can't list them all. Order G3855 replacement bearing.

3 PC Professional OGEE Cabinet Router Bits 1/2 In Shank

3 PC Professional OGEE Cabinet Router Bits 1/2 In Shank Review

3 PC Professional OGEE Cabinet Router Bits 1/2 In Shank Feature

• 1/2" Shank Diameter Raised Panel Bit, Stile Bit, and Rail Bit Fully Shielded Bearings
• Stile & Rail Set-Roman OGEE 1/2 x 1-3/4"
• Raised Panel Bit with XUTTERS 1/2 x 3-1/8"
• Wooden Box 8-1/4 x 3-3/8 x 3-1/2"

Make beautiful raised panels for doors and cabinets.

BOSCH 85266M 1/2-Inch Diameter 1-Inch Cut Double Flute Laminate Flush Trim Router Bit 1/4-Inch Shank With Ball Bearing

BOSCH 85266M 1/2-Inch Diameter 1-Inch Cut Double Flute Laminate Flush Trim Router Bit 1/4-Inch Shank With Ball Bearing Review

BOSCH 85266M 1/2-Inch Diameter 1-Inch Cut Double Flute Laminate Flush Trim Router Bit 1/4-Inch Shank With Ball Bearing Feature

• Recommended for use with a routing table
• All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router

Bosch 85266M Laminate Trim Bit 1/2", 1/4" Shk. w/B.B., C.T.Bosch Power Tools and Accessories is one of the divisions within the Robert Bosch Tool Corporation, which is one of the largest power tool and accessory manufacturers in the world. Bosch provides a complete line of corded and cordless power tools and accessories engineered to survive any jobsite and allow professionals to take control of their work.Bosch 85266M Laminate Trim Bit 1/2", 1/4" Shk. w/B.B., C.T. Features:; Carbide tipped double laminate flush trimming bits are micrograin bits ideal for fast, smooth, accurate trim cuts with a shielded, compact ball bearing pilot; Carbide Tipped Double Flute Laminate Flush Trimming Bits ; Item # 85266M; A. Overall Diameter 1/2â³; B. Cutting Edge Length 1â³; C. Shank Diameter 1/4â³; D. Shank Length 31/32â³; E. Overall Length 2-11/16â³; F. Bearing Diameter 1/2â³

MLCS Molding Plane Profile Router Bit 1/2" Shank

MLCS Molding Plane Profile Router Bit 1/2" Shank Review

MLCS Molding Plane Profile Router Bit 1/2" Shank Feature

• Quality, Carbide-tipped Router Bit
• Designs from Antique Molding Profiles
• Combine Cuts for Unlimited, Unique Designs
• Make Architectural Millwork, Moldings, Baseboards, and Chair Rails
• FREE Shipping in the Contiguous USA.

2-flute, carbide-tipped with totally enclosed ball bearing guides. Profiles are copied from popular antique molding planes. Produce architectural millwork, moldings, baseboards, chair rails, and more. Combine cuts from two or more bits for an unlimited variety of profiles. 1-3/8" Carbide Height. 3/16" Depth of Cut. 1/2" Shank.

Freud 38-314 Quadra- Cut 1-9/16-Inch Diameter Cove and Bead Router Bit with 1/2-Inch Shank

Freud 38-314 Quadra- Cut 1-9/16-Inch Diameter Cove and Bead Router Bit with 1/2-Inch Shank Review

Freud 38-314 Quadra- Cut 1-9/16-Inch Diameter Cove and Bead Router Bit with 1/2-Inch Shank Feature

• New Quadra- Cut Design 1-9/16-inch diameter, 1/4 inch radius, 1/2-inch shank
• Features Freud's Tico High Density carbide with Titanium for long life
• The 2 + 2 cutting technology provides the finest finish in crossgrain applications. Cuts all composition materials, plywoods, hardwoods, and softwoods
• Non-Stick Perma-Shield coating to resist heat and reduce pitch build-up
• Freud's Limited Lifetime Guarantee

Designed for the serious woodworker, the Freud 38-314 Cove and Round Router Bit with 1/2-Inch Shank features a non-stick Perma-SHIELD coating and Freud's patented Quadra-Cut design for a flawless finish that requires no rework. Quadra-Cut employs four cutting blades, rather than the industry standard of two, letting you create professional-quality decorative edging for cabinets, molding, and furniture on a variety of stock, including composition materials, plywood, hardwood, and softwood. Because it's constructed with Freud's exclusive TiCo Hi-Density Carbide MicroGrain material, this durable router bit is designed last.

The cove and round router bit produces smooth, decorative edges.

Different setups let you achieve multiple profiles. View larger.

Quadra-Cut delivers quick, clean results. View larger.

Quadra-Cut Design for a Consistently Clean Finish
The exclusive Quadra-Cut design uses four cutters for a flawless finish. This innovative cutter design works by utilizing two of the cutters for an upward cutting action, while the other two cutters simultaneously cut downward. The result is an amazingly smooth finish that requires no rework.

Create Decorative Edging for a Distinctive Look
Use the 38-314 Cove and Round Router Bit with any handheld or table-mounted portable router that accepts a 1/2-inch shank for an accurate, decorative touch on all of your wood furniture, molding, millwork, and cabinetry pieces. The 38-314 Cove and Round Router Bit produces an incredibly accurate 1/4-inch radius cut for smooth, decorative edges.

The 38-314 Cove and Round Router Bit consistently produces professional-looking results, and it's versatile too. You can use it to add a decorative touch to a variety of edges, such as plaques, frames, millwork, cabinets and most furniture pieces.

Durable Design with Protective Coating to Resist Heat and Corrosion
Freud equips all of their router bits with their exclusive TiCo Hi-Density MicroGrain carbide for maximum durability and cutting life. In addition, Freud shields their bits from heat, rust, corrosion and wear by coating all of their Quadra-Cut Router Bits with their exclusive non-stick, red Perma-SHIELD coating.

The 38-314 Cove and Round Router Bit measures 2-3/4 inches long and has a 1/2-inch shank and 1/4-inch cutting radius. Freud cutting tools are backed by their exclusive Freud Limited Lifetime Cutting Tool Warranty to ensure customer satisfaction with every purchase.

About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is the only manufacturer of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt. By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application; thereby, maximizing the cutting life and performance of the tool. Freud's full line of high-quality woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more. For more information, visit www.freudtools.com or contact customer service at phone: 800-472-7307.

What's in the Box
38-314 Cove and Round Router Bit with 1/2-Inch Shank. An industry leader for over 50 years, the Freud name equals quality, precision and craftsmanship. Freud router bits feature Freud made TiCo Hi-Density Carbide for maximum cutting life. Each bit is individually balanced, giving a cut above the rest. Revolutionary Quadra-Cut design employs four cutting edges vs. two, for a flawless finish that requires no sanding or rework. Two carbide cutters have an up-shear angle to remove most of the stock while the second pair of down-shear cutters makes a final cut to produce an ultra clean edge. Add distinctive design to cabinets, furniture, plaques and millwork with this decorative edging bit. All bits have 1/2" shanks.

Raised Panel Router Bit Set (3 pc) for cabinet doors, with backcutter 1/2" shank

Raised Panel Router Bit Set (3 pc) for cabinet doors, with backcutter 1/2" shank Review

Raised Panel Router Bit Set (3 pc) for cabinet doors, with backcutter 1/2" shank Feature

• Micrograin carbide tips
• 1/2" shank
• Includes stile, rail, and raised panel cutters (ogee with backcutter on panel bit)
• Manufactured with tight quality control for highest quality
• Includes wooden storage box

Set contains 3 bits with 1/2" shanks for cutting raised panel doors. Makes an ogee style panel (see profile). The backcutter on the panel bit provides a raised panel on the inside of the doors as well.

Magnate 1209 Corner Rounding/Beading Router Bit - 3/8" Radius; 5/8" Cutting Length

Magnate 1209 Corner Rounding/Beading Router Bit - 3/8" Radius; 5/8" Cutting Length Review

Magnate 1209 Corner Rounding/Beading Router Bit - 3/8" Radius; 5/8" Cutting Length Feature

• 2 Flute Carbide Tipped; 3/8" Radius; 5/8" Cutting Length; 1/2" Shank Diameter
• 1-1/4" Overall Diameter; 1-1/2" Shank Length

This carbide tipped router bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated carbon steel body thus leading to exceptional hardness and rigidity. Designed for decorative edge rounding. Good for making dropleaf table joints. Replacing original bearing (BR-03) by BR-02, these bits create a round edge with either single or a double stepped bead. Order BR-02 separately.

Magnate 1938 Straight Router Bit For Plastic or Solid Woods - 1/4" Cutting Diameter

Magnate 1938 Straight Router Bit For Plastic or Solid Woods - 1/4" Cutting Diameter Review

Magnate 1938 Straight Router Bit For Plastic or Solid Woods - 1/4" Cutting Diameter Feature

• 2 Flute MicroGrain Solid Carbide ; 1/4" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter
• 2-1/2" Overall Length

This bit provides fast, free cutting and long edge life in harder materials. It is designed for solid woods, wood composites, acrylics, plastics and solid surface.

Magnate 7411 Door Lip / Finger Pull Router Bits - 2" Overall Diameter; 1-1/4" Cutting Length

Magnate 7411 Door Lip / Finger Pull Router Bits - 2" Overall Diameter; 1-1/4" Cutting Length Review

Magnate 7411 Door Lip / Finger Pull Router Bits - 2" Overall Diameter; 1-1/4" Cutting Length Feature

• 2 Flute Carbide Tipped; 2" Overall Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter
• 3/4" Small Diameter; 1/4" Radius

This carbide tipped router bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated carbon steel body thus leading to exceptional hardness and rigidity.

WHITESIDE MACHINE #1066 CARBIDE-TIP 2 FLUTE STRAIGHT ROUTER BIT 1/2 DIA X 1" CL X 1/2" SHANK

WHITESIDE MACHINE #1066 CARBIDE-TIP 2 FLUTE STRAIGHT ROUTER BIT 1/2 DIA X 1" CL X 1/2" SHANK Review

WHITESIDE MACHINE #1066 CARBIDE-TIP 2 FLUTE STRAIGHT ROUTER BIT 1/2 DIA X 1" CL X 1/2" SHANK Feature

• AMERICAN MADE FOR THE AMERICAN WOODWORKER
• MADE FROM SOLID ALLOY STEEL
• PRECISION GROUND FOR PROPER BALANCE AT HIGH RPMS
• MADE WITH THICK CARBIDE FOR EXTRA SHARPENINGS
• USES THE HIGHEST QUALITY AMERICAN MADE MICROGRAIN CARBIDE

WHITESIDE MACHINE 1066 CARBIDE-TIP 2 FLUTE STRAIGHT ROUTER BIT 1/2 DIA X 1" CL X 1/2" SHANK X 2-5/8" OAL

Freud 75-102 1/4-Inch Double-Flute Up Spiral Router Bit

Freud 75-102 1/4-Inch Double-Flute Up Spiral Router Bit Review

Freud 75-102 1/4-Inch Double-Flute Up Spiral Router Bit Feature

• Combines effective chip removal with a cut unmatched by standard straight bits
• Ideal for grooves and dadoes in all composition materials, plywood, hardwood, and soft wood
• Suited for cutting mortises and routing deep blind holes
• Computer-designed flutes provide chip removal required in production settings
• Manufacturer's limited lifetime warranty

The Freud Difference
Freud manufactures some of the most innovative, technologically advanced woodworking tools and accessories in the world. To ensure that the highest quality products meet the toughest design standards, Freud owns and operates six manufacturing facilities in Western Europe. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain carbide with titanium, called TiCo -- a combination of titanium and cobalt. Freud develops different types of carbide for each application to maximize the cutting life and performance of the tool; and Freud also operates one of the most modern product development research centers in Europe. By overseeing the entire manufacturing process from start to finish, Freud guarantees some of the highest quality, most advanced products in the industry.

About Freud's Industrial Bits
Serious woodworkers choose serious accessories. They choose Freud. The Freud name equals quality, precision and craftsmanship. Freud router bits feature TiCo Hi-Density Carbide for maximum cutting life and are individually balanced; providing a cut above the rest. When you’re looking for a serious router bit, look for Freud red.

About this Double-Flute Up Spiral Router Bit
The Freud 1/4-inch double-flute up spiral router bit combines effective chip removal with a cut unmatched by standard straight bits. The computer-designed flutes provide the chip removal required in heavy-duty production settings. Suited for cutting mortises and routing deep blind holes, this bit is ideal for grooves and dadoes in all composition materials, including plywood, hardwoods, and softwoods.

Key Tech Specs:

• Diameter: 1/4-inch
• Length: 2-1/2 inches
• Shank: 1/4-inch

Applications
Designed for use on CNC and other automatic routers as well as hand-held and table-mounted portable routers, this bit is excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.

Warranty
This product is covered by Freud's limited lifetime warranty. Freud manufactures some of the most innovative, technologically advanced woodworking tools and accessories in the world. To ensure that the highest quality products meet the toughest design standards, Freud owns and operates six manufacturing facilities in Western Europe. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain carbide with titanium, called TiCo -- a combination of titanium and cobalt. Freud develops different types of carbide for each application to maximize the cutting life and performance of the tool; and Freud also operates one of the most modern product development research centers in Europe. By overseeing the entire manufacturing process from start to finish, Freud guarantees some of the highest quality, most advanced products in the industry.